NIOSH logo and tagline

Bliss & Laughlin Steel

Print
Related Pages
On This Page

(Site Profile/Docket Number 157)

Location: Buffalo, New York

Also Known As: Niagara Cold Drawn

Special Exposure Cohort Petition Information

The Special Exposure Cohort (SEC) is a unique category of employees established by the Act (42 CFR Part 83). Claims compensated under the SEC do not have to go through the dose reconstruction process. To qualify for compensation under the SEC, a covered employee must meet specific requirements (e.g., must have at least one of 22 “specified cancers,” and have worked for a specified time period at one of the SEC sites). Classes of employees and work sites can be considered for addition to the SEC through a NIOSH petition process. More information about the Special Exposure Cohort can be found on our Frequently Asked Questions page.

Open/Active SEC Petitions

To date, there are no open/active SEC petitions from Bliss & Laughlin Steel.

Classes Not Added to the SEC

  • All Atomic Weapons Employees who worked in any area at the Bliss and Laughlin Steel site in Buffalo, New York, from January 1, 1999, through December 31, 1999.

    Note: This class was established from Petition 230

  • All Atomic Weapons Employees who worked at the Bliss & Laughlin Steel Company located at 110 Hopkins Street, Buffalo, New York, for the period from January 1, 1951 through December 31, 1952 and/or during the residual period from January 1, 1953 through December 31, 1998.

    Note: This class was established from Petition 131

Petitions Qualified for Evaluation

Below is a list of the petitions that qualified for evaluation. Select a petition on the list to view the table for that particular petition.

Advisory Board Work Group on Bliss & Laughlin Steel

This Work Group is responsible reviewing the SEC petition from the Bliss and Laughlin Steel petitioners, reviewing the NIOSH Evaluation Report of the petition, considering issues that may be raised by the Board’s contractor (SC&A) concerning the NIOSH Evaluation Report, and for assisting NIOSH and SC&A in the resolution of such issues. The Work Group may recommend to the Board, changes in the Site Profile as appropriate. The Work Group should strive to develop a recommendation to the Board on whether a class should be added to the SEC.

Note: The Bliss & Laughlin Steel Work Group is no longer active. The work site was also previously listed under the TBD 6000 Work Group, but is not currently under discussion.

Work Group Members:

  • Paul L. Ziemer, Ph.D. (Chair)

  • Henry A. Anderson, M.D.

  • Josie Beach

Meeting Information:

Advisory Board Work Group on TBD 6000

This Work Group is responsible for the review of the specified TBDs and the Appendices that apply to specific work sites. The Work Group will also review reports developed by the Board’s contractor (SC&A) pertaining to these TBDs and the Appendices. They will assist NIOSH and SC&A in resolving issues that arise through the review process. The Work Group will make recommendations to the Board in cases where Appendices involve sites with SEC petitions.

Sites currently being considered by the Work Group include:

Note: Baker Brothers, Bliss & Laughlin Steel, and Simonds Saw and Steel Company work sites were previously discussed by the TBD 6000 Work Group, but are not currently under discussion.

Meeting information (including agendas and transcripts) for this Work Group are on the individual work site pages listed above and the Advisory Board and Public Meetings pages.

Work Group Members:

  • Paul L. Ziemer, Ph.D. (Chair)

  • Henry A. Anderson, M.D.

  • Josie Beach

Meeting Information:

  • December 16, 2009
    Meeting of the Advisory Board’s Work Group on TBD 6000/6001, Appendix BB

    Time/Location:

    9:30 a.m. Eastern Standard Time (EST)
    Meeting Type: Face-to-Face; Public, No Comment Period

    Cincinnati Airport Marriott
    2395 Progress Dr.
    Hebron, KY 41048
    Phone: (859) 586-0166

    Teleconference: +1-866-659-0537
    Participant Code: 9933701

    Pre-Decisional Document Policy

    Available Meeting Items:

  • October 14, 2009
    Meeting of the Advisory Board’s Work Group on TBD 6000/6001, Appendix BB

    Time/Location:

    9:30 a.m. Eastern Standard Time (EST)
    Meeting Type: Face-to-Face; Public, No Comment Period

    Cincinnati Airport Marriott
    2395 Progress Dr.
    Hebron, KY 41048
    Phone: (859) 586-0166

    Teleconference: +1-866-659-0537
    Participant Code: 9933701

    Pre-Decisional Document Policy

    Available Meeting Items:

  • March 11, 2009
    Meeting of the Advisory Board’s Work Group on TBD 6000/6001, Appendix BB

    Time/Location:

    10:00 a.m. Eastern Standard Time (EST)
    Meeting Type: Face-to-Face; Public, No Comment Period

    Cincinnati Airport Marriott
    2395 Progress Dr.
    Hebron, KY 41048
    Phone: (859) 586-0166

    Teleconference: +1-866-659-0537
    Participant Code: 9933701

    Pre-Decisional Document Policy

    Available Meeting Items:

  • November 10, 2008
    Meeting of the Advisory Board’s Work Group on TBD 6000/6001, Appendix BB

    Time/Location:

    9:30 a.m. Eastern Standard Time (EST)
    Meeting Type: Face-to-Face; Public, No Comment Period

    Cincinnati Airport Marriott
    2395 Progress Dr.
    Hebron, KY 41048
    Phone: (859) 586-0166
    Fax:(505) 986-6439

    Pre-Decisional Document Policy

    Available Meeting Items:

Pre-Decisional Document Policy

Please Note: As part of the procedures and processes of the Advisory Board’s Work Groups, several kinds of pre-decisional documents may be developed. These pre-decisional documents, such as white papers, matrices, working drafts, etc., are distributed among Work Group members as research and background tools to facilitate discussion and deliberation. Although discussion during a public meeting may cover pre-decisional documents, these documents often are not further revised or finalized, and thus do not reflect the final determination or evaluation of the Advisory Board and its Work Groups. Additionally, some pre-decisional documents not otherwise posted on the website may contain sensitive information, which would require an interested party to obtain such documents by filing a Freedom of Information Act (FOIA) request with the CDC/ATSDR FOIA Office at FOIARequests@cdc.gov.

Technical Documents

If the energy employee’s personal radiation information is incomplete, NIOSH will use other sources to estimate the radiation dose. This may involve using technical documents called Site Profiles, Technical Basis Documents, and Technical Information Bulletins.

Technical Basis Documents

Advisory Board and NIOSH Discussions on Bliss & Laughlin Steel

The Bliss & Laughlin Steel discussion papers listed below are working documents prepared by NIOSH or its contractor for use in discussions with the Advisory Board on Radiation and Worker Health or its Working Groups or Subcommittees. Draft, preliminary, interim, and white paper documents are not final NIOSH or Advisory Board (or their technical support and review contractors) positions unless specifically marked as such. These documents represent preliminary positions taken on technical issues prepared by NIOSH or its contractor.

The discussion papers have been reviewed to identify and redact any information that is protected by the Privacy Act 5 USC §552a and has been cleared for distribution.

Program Evaluation Plans (PEPs) and Program Evaluation Reports (PERs)

NIOSH is committed to applying the best available science in dose reconstructions. In keeping with this commitment, completed cases with probabilities of causation less than 50% are reviewed as relevant new information becomes available. The results of these reviews are described in a Program Evaluation Report (PER). The PER details the effect, if any, of the new information on the completed dose reconstruction. If it appears that the new information may result in an increase in dose for a completed dose reconstruction with a probability of causation of less than 50%, NIOSH is committed to working with the Department of Labor to reopen and rework the dose reconstruction, as appropriate. A Program Evaluation Plan (PEP) describes plans for evaluating specific program details or issues.

To view all PERs and PEPs that have been developed, please refer to the Program Evaluation Reports (PERs) and Program Evaluation Plans (PEPs) page.

  • DCAS-PER-050 Rev-0: Bliss and Laughlin Appendix [27 KB (2 pages)]
    March 13, 2014
    About this Document: Determines the effect on previously completed claims due to the approval of the Bliss and Laughlin Appendix.
    Summary: Claims were reviewed with a probability of causation less than 50% and dose reconstructions completed prior to 9/11/12, the date the appendix was approved. Dose for the each of these claims was recalculated using all current dose reconstruction methods. The probability of causation remained below 45% for all claims.

Public Comments on Bliss & Laughlin Steel Documents

How to Submit Comments

Comments on Bliss & Laughlin Steel Documents can be submitted to the NIOSH Docket Officer electronically by email at nioshdocket@cdc.gov or printed comments can be mailed to:

NIOSH Docket Office
Robert A. Taft Laboratories, MS-C34
1090 Tusculum Avenue
Cincinnati, OH 45226
Please include the Site Profile/Docket Number (157) on all comments.

Comments Received

No comments on Bliss & Laughlin Steel have been received at this time.

Document Archive for Bliss & Laughlin Steel

Site Profile Document

  • NIOSH/DCAS: Battelle-TBD 6000, Appendix D – Bliss & Laughlin Steel – Site Profiles for Atomic Weapons Employers that Worked Uranium Metals, Rev. 0