NIOSH logo and tagline

Cotton dust (raw)

Synonyms & Trade Names
Raw cotton dust
CAS No.
RTECS No.
DOT ID & Guide
1365 133(cotton)
Formula
Conversion
IDLH
100 mg/m3
See: IDLH INDEX
Exposure Limits
NIOSH REL
TWA <0.200 mg/m3 See Appendix C
OSHA PEL
[Z-1-A & 1910.1043] See Appendix C
Measurement Methods
OSHA [1910.1043]
See: NMAM or OSHA Methods
Physical Description
Colorless, odorless solid
Molecular Weight
?
Boiling Point
Decomposes
Melting Point
Decomposes
Solubility
Insoluble
Vapor Pressure
0 mmHg (approx)
Ionization Potential
NA
Specific Gravity
?
Flash Point
NA
Upper Explosive Limit
NA
Lower Explosive Limit
NA
Combustible Solid
Incompatibilities & Reactivities
Strong oxidizers
Exposure Routes
inhalation
Symptoms
Byssinosis: chest tightness, cough, wheezing, dyspnea (breathing difficulty); decreased forced expiratory volume; bronchitis; malaise (vague feeling of discomfort); fever, chills, upper resp symptoms after initial exposure
Target Organs
cardiovascular system, respiratory system
Personal Protection/Sanitation
(See protection codes)
Skin:No recommendation
Eyes:No recommendation
Wash skin:No recommendation
Remove:No recommendation
Change:No recommendation
First Aid
(See procedures)


Breathing:Fresh air
Respirator Recommendations

(See Appendix E)

NIOSH

Up to 1 mg/m3:
(APF = 5) Any quarter-mask respirator.
Click here for information on selection of N, R, or P filters.

Up to 2 mg/m3:
(APF = 10) Any particulate respirator equipped with an N95, R95, or P95 filter (including N95, R95, and P95 filtering facepieces) except quarter-mask respirators. The following filters may also be used: N99, R99, P99, N100, R100, P100.
Click here for information on selection of N, R, or P filters.
(APF = 10) Any supplied-air respirator

Up to 5 mg/m3:
(APF = 25) Any supplied-air respirator operated in a continuous-flow mode
(APF = 25) Any powered, air-purifying respirator with a high-efficiency particulate filter.

Up to 10 mg/m3:


(APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter.
Click here for information on selection of N, R, or P filters. 


(APF = 50) Any supplied-air respirator that has a tight-fitting facepiece and is operated in a continuous-flow mode
(APF = 50) Any powered, air-purifying respirator with a tight-fitting facepiece and a high-efficiency particulate filter
(APF = 50) Any self-contained breathing apparatus with a full facepiece
(APF = 50) Any supplied-air respirator with a full facepiece

Up to 100 mg/m3:
(APF = 1000) Any supplied-air respirator operated in a pressure-demand or other positive-pressure mode

Emergency or planned entry into unknown concentrations or IDLH conditions:
(APF = 10,000) Any self-contained breathing apparatus that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode
(APF = 10,000) Any supplied-air respirator that has a full facepiece and is operated in a pressure-demand or other positive-pressure mode in combination with an auxiliary self-contained positive-pressure breathing apparatus

Escape:


(APF = 50) Any air-purifying, full-facepiece respirator with an N100, R100, or P100 filter.
Click here for information on selection of N, R, or P filters. 


Any appropriate escape-type, self-contained breathing apparatus

Important additional information about respirator selection

See also
INTRODUCTION   MEDICAL TESTS: 0058
Page last reviewed: October 30, 2019